Special sockets should be used for air conditioner

2022-07-22
  • Detail

Since air conditioning is a household appliance with high power, it is generally necessary to install special air conditioning sockets in home decoration. What are the differences between air conditioning sockets and ordinary sockets? What are the precautions when installing the air conditioning socket? Next, follow Xiaobian to learn more

since air conditioners are high-power household appliances, special air-conditioning sockets are generally installed in home decoration. What are the differences between air-conditioning sockets and ordinary sockets? What are the precautions when installing the air conditioning socket? Next, follow Xiaobian to learn more

difference between air conditioning socket and ordinary socket

air conditioning socket

1. A special socket for air conditioning, infrared receiver and power supply indicator light are set on the socket panel

2. The socket does not supply power at ordinary times (i.e. “ always dead ”), which has high safety

3. When in use, the plug of the air conditioner host is inserted into the socket. At this time, use the air conditioner remote control to start the socket, the panel LED lights up, and the socket starts to supply power. Press the air conditioner remote control again, and the air conditioner starts to work

4. After the socket starts to supply power, if the air conditioner does not start to work, the socket power supply will be automatically cut off after a delay of about 180 seconds, and the socket will return to the normal dead state

5. After the socket starts to supply power, the air conditioner is turned on and the socket continues to supply power. Until the air conditioner is turned off, the socket will automatically power off

6. This socket is a special socket designed for air conditioning. If the air conditioning does not work, the socket will not supply power. Only when the air conditioning starts to work, the socket will continue to supply power. Thus solving the problem of air conditioning “ Standby power consumption ” To save electricity consumption

ordinary socket

has one or more seats where circuit wiring can be inserted. Through it, various wiring can be inserted to facilitate connection with other circuits. Through the connection and disconnection between the line and the copper parts, we can finally achieve the connection and disconnection of this part of the circuit

installation attention

1. The installation height of the socket should be installed according to the design requirements when there are provisions in the design; When the design is not clear, it should generally comply with: the socket with safety door should not be less than 0.3m; The socket without safety door is not lower than 1.8m; It is recommended to buy a socket with a safety door as much as possible, because the price difference between the two is not big

2. Waterproof and splash proof sockets with good sealing shall be used in toilets or other wet places. (Note: for the socket with safety door, the plastic baffle (safety door) in front of the metal reed of the socket is added to the general socket. For the three hole socket, when the plug is inserted, the grounding pile head (slightly longer) is inserted into the hole first, and the mechanism in the socket acts to open the other two hole doors. The two hole socket must be inserted into the socket pile head at the same time, and the safety door can be opened, so as to prevent children from accidentally inserting metal objects and causing safety accidents.)

3. When installing the socket, its panel should be upright and close to the wall. Moreover, the wiring (phase) should conform to: single-phase two hole socket, and the right hole or upper hole facing the socket is connected with phase wire (live wire); The left hole or the lower hole is connected to the zero line; For single-phase three hole socket, the right hole facing the socket is connected with phase wire (L, live wire), the left hole is connected with neutral wire (n), and the upper hole is connected with ground wire (PE)

air conditioners are motor products. Motor products have starting current, and the maximum starting current can reach 3 times the peak current. Therefore, the rated current of the air conditioning socket is higher. Generally, there are 16 A, 20 A, 25 A, 32 A, etc. The opening distance of the plug of the socket with different amperes is different. The thickness of ordinary insert is 0.3mm, 30 wires. The insert thickness of the air conditioning socket is 0.6mm, 60 wires. Generally, a 16 Amp socket can be used for a 2.5-horse air conditioner; 20 Amp air conditioner for 3 HP; 25 amp is suitable for more than 3 HP air conditioners; 32 amp is suitable for air conditioners with more than 5 HP

warm tips: for more practical decoration knowledge and follow-up photos of real scenes on the construction site, please pay attention to your palm (wechat: mall_jia)

上海尿道下裂医院

福州男科医院

威海男科医院

Copyright © 2011 JIN SHI